2
Driver Installation
Note: Current drivers can only support Windows 98/98SE, ME, NT, 2000 and XP.
Driver Locations
This Serial ATA host controller card has two sets of drivers.
a) SIL3114RAID : Serial ATA host controller card (BIOS with RAID function).
b) SIL3114 : Serial ATA host controller card (BIOS without RAID function).
These two sets of drivers can be located in these two directories respectively of the Driver CD.
1. SIL3114RAID : /Silicon_Image/SIL3114RAID/
2. SIL3114 : /Silicon_Image/SIL3114/
Windows 98/98SE or Windows ME
Step 1: Start Windows 98/98SE or Windows ME.
Step 2: The “Update Device Driver Wizard” will appear, informing you that it has found a “PCI RAID
Controller”, click the “Next” button.
Step 3: (a) Windows 98/98SE user - Select “Specify a location”.
(b) Windows ME user - Select “Specify the location of the driver (Advanced)” and then select
“Specify a location”.
Step 4: Insert the Driver CD in the CDROM drive and click on the “Browse” button.
Step 5: At the “Browse” option:
(1) Select CDROM drive.
(2) Select folder “Silicon_Image”.
(3a) BIOS with RAID function: Select folder “SIL3114RAID” or
(3b) BIOS without RAID function: Select folder “SIL3114”.
(4) Select folder “Win_Drv”.
Step 6: The “Update Device Driver Wizard” will appear, informing you that it has found:
(1a) BIOS with RAID function: “Silicon Image SIL 3114 SATARaid Controller” driver or
(1b) BIOS without RAID function: “Silicon Image SIL 3114 SATALink Controller” driver.
(2) Click the “Next” button.
Step 7: Follow the instructions to finish up the driver installation.
Windows NT 4.0 and Windows 2000/XP Fresh Installation
If you are performing a new Windows NT 4.0, 2000 or XP installation to a SATA hard drive attached to the
Serial ATA host controller card.
Step 1: Make sure to copy the Windows driver from the Driver CD on to a 1.44MB floppy diskette. You will
need the driver in the 1.44MB floppy diskette during the installation.
Commentaires sur ces manuels