Syba SD-UEN-525 Manuel d'utilisateur télécharger pdf

Installation Manual

Introduction

This 5.25” enclosure is designed to provide a solution to connect existing storage

devices such as 3.5” IDE hard drive, MO drives, CD devices or DVD devices to

IEEE1394a or USB2.0. This 5.25” enclosure can provide peak data transfer rate up

to 480Mbps for USB 2.0 interface and 400Mbps for IEEE 1394a interface.

Features

General

y Support plug-n-play. Hot- Swap and Wake-UP.

y Accommodate all existing storage devices such as 3.5” IDE hard drive, MO

drives, CD devices or DVD devices

y Support Self power mode.

y Support Windows98, 98SE, ME, 2000, XP and MAC OS* (*Depending on

chipset).

USB 2.0 (For USB 2.0 & Combo Version)

y Compliant with Universal Serial Bus Specification Revision 2.0

y Fully backward compatible to USB 1.1

y Compliant with ATA/ATAPI-6 Specification

y Support LBA 48, PIO Mode 0-4, DMA Mode 0-2, UDMA Mode 0-5

y Compliant with USB Mass Storage Bulk only Specification 1.0

y Support High-Speed (480Mbps) and Full-Speed (12Mbps) mode

IEEE 1394a (For IEEE 1394a & Combo version)

y Compliant with IEEE 1394-1995 and 1394a standard for high performance

serial bus.

y Sustained IDE rate at 25Mbytes/sec (200Mbps), Peak transfer rate at

50Mbytes/sec (400Mbps).

y Compliant with ATA/ATAPI-6 Specification.

y Support PIO Mode 0-4, DMA mode 0-2 and UDMA mode 0-5.

What is in your package?

Please check whether the package contains following items:

y One 5.25’’ Enclosure

y Installation Manual

y USB 2.0 (Type ‘A’ to Type ‘B’) cable (USB 2.0 & Combo version only)

y 1394a (6pin to 6pin) cable (1394a & Combo version only)

y AC-DC Power Supply 12VDC

y Screws for securing the enclosure and 3.5” hard drive or CD/DVD devices

y Driver CD

If any item is missing or damaged, please contact the retailer as soon as possible.

1 2 3 4 5 6

Résumé du contenu

Page 1 - Installation Manual

Installation Manual Introduction This 5.25” enclosure is designed to provide a solution to connect existing storage devices such as 3.5” IDE hard dr

Page 2

HARDWARE INSTALLATION Installing a 3.5’’ hard drive in to the 5.25’’ enclosure Step 1: Take off the top cover of the 5.25” enclosure as shown in diagr

Page 3

Step 3: Put the top cover of the 5.25” enclosure back in place and secure the enclosure with screws as shown in diagram. Step 4: Connect the appropri

Page 4

Installing a 3.5’’ hard drive in to the 5.25’’ enclosure Step 1: Take off the top cover of the 5.25” enclosure as shown in diagram. Step 2: Disconne

Page 5

Step 3: Put the top cover of the 5.25” enclosure back in place and secure the enclosure with screws as shown in diagram. Step 4: Connect the appropr

Page 6 - P/N: 5019755252100

SOFTWARE INSTALLATION Note: This software installation section assumes that your computer system already have 1394a or USB 2.0 ports available for c

Commentaires sur ces manuels

Pas de commentaire

Syba SD-UEN-525 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Syba SD-UEN-525. Syba SD-UEN-525 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Syba SD-UEN-525